Hiwin LMSSA, Assembly Instructions Manual

Page: 4 / 44

Contents
Linear motor axis LMSSA LMSSA-01-1-EN-2201-MA Seite 4 von 44
1 General information
1.1 About this user manual
1.1.1 Requirements
We assume that

operating staff are trained in the safe operation practices for linear motor systems and have read and
understood this user manual in full;

maintenance staff maintain and repair the linear motor systems in such a way that they pose no danger to
people, property or the environment.
1.1.2 Availability
This user manual must remain constantly available to all persons who work with or on the linear motor systems.
1.2 Depictions used in this user manual
1.2.1 Instructions
Instructions are indicated by triangular bullet points in the order in which they are to be carried out.
Example:

Position the linear motor system on the mounting holes.

Place the mounting bolts into the mounting holes and tighten in a spiral pattern to a torque of 10 Nm.
1.2.2 Lists
Lists are indicated by bullet points.
Example:
The linear motor systems must not be operated:

Outdoors

In potentially explosive atmospheres
1.2.3 Information
Information is to describe general information and recommendations.
Example:
Note:
Please contact HIWIN for special requests.
1.2.4 Depiction of safety notices
Safety notices are always indicated using a signal word and sometimes also a symbol for the specific risk (See
section 1.2.4). The following signal words and risk levels are used:
Danger! Imminent danger!
Non-compliance with the safety notices will result in serious injury or death!
Warning! Potentially dangerous situation!
Non-compliance with the safety notices runs the risk of serious injury or death!