Hiwin LMSSA, Assembly Instructions Manual

Page: 34 / 44

Contents
Linear motor axis LMSSA LMSSA-01-1-EN-2201-MA Seite 34 von 44
Note:
Only use lubricants that are in accordance with DIN 51825, KP2K of the consistency class NGLI2.
Note:
Ensure that only lubricants without solid lubricant particles (e.g. graphite or MoS2) are used!
Note:
Further information about lubrication and selection of approved lubricants can be found in the user manual for
linear guideways at
www.hiwin.de .
Fig. 7.3: Grease nipples on linear guideways

Relubricating interval every 200–600 operating hours or 1000 km.

For LMSSA size, grease quantity (See Table 7.5)

Relubrication as standard through grease nipple (See Fig. 7.3) with standard grease guns.
SSA 08, 10, MGN Block grease maintenance kit:
A syringe is used to apply lubricant to the ports. The standard is a fully synthetic lubricant with a main
constituent.
Synthetic hydrocarbons (PAO). The viscosity class the oil is 680(ISO VG680).
Fig. 7.4: SSA 08, 10, MGN Block grease maintenance kit
Table 7.2: SSA 08, 10, grease syringe
Part No. Part name Specification Schematic diagram
940303200002 Syringe 10 cc
940301800005 Syringe Needle 14G-1/2”45°