Hiwin LMSSA, Assembly Instructions Manual

Page: 14 / 44

Contents
Linear motor axis LMSSA LMSSA-01-1-EN-2201-MA Seite 14 von 44
Order code Motor type Continuous force [N] Peak force [N]
10S200 LMSA12 205 579
13S200
18S200
13S300 LMSA13 308 868
18S300
18C100 LMC-EFC2 75 300
18C200 LMC-EFC4 150 600
20S300 LMSA22 362 1.023
20S500 LMSA23 544 1.535
20S700 LMSA24 725 2.048
20C100 LMCB5 91 364
20C200 LMCB8 145 580
3.7 Positioning measurement system
Attention! Damage caused by scratching!
The measuring scale of the optical measuring system may be damaged by improper handling.

Handle the measuring scale with care!
Attention! Damage to the magnetic positioning measurement system!
Strong magnetic fields and vibrations can damage the magnetic positioning measurement system.

Protect the magnetic positioning measurement system against strong magnetic fields!

Protect the magnetic positioning measurement system against strong vibrations!
The distance travelled is measured by a high-resolution positioning measurement system that is mounted on the
base. Depending on its type, the linear motor system features an optical or a magnetic positioning measurement
system. The installed positioning measurement system is fully cabled and is connected to the controller via a
separate connector (See Technical Information and Approval Drawing).
Table 3.4: Positioning measurement system selection
Order code Encoder type Resolution [μm] Interface Scale type
A Q4BCA30L00T 0,1 Incremental
1 V
pp
(analogue) RTLC40-S
D PM-B-03-3A-T-10 1,0 Incremental
1 V
pp
(analogue) SB-20
E PM-B-03-3D-T-10 1,0 Incremental TTL (digital) SB-20
G Q4BCX30D20A 1,0 Incremental TTL (digital) RTLC40-S
K Q4BCY30D20A 0,1 Incremental TTL (digital) RTLC40-S
H LMAESA-A-30-3 2,0 Incremental 1 V
pp
(analogue) stator
P EL26BBB500F30A 0,5 Absolute, 26-bit BiSS-C RTLA50-S