Hiwin LMSSA, Assembly Instructions Manual

Page: 29 / 44

Contents
Linear motor axis LMSSA LMSSA-01-1-EN-2201-MA Seite 29 von 44
6 Commissioning
6.1 Switch on the linear motor system
Danger! Danger from strong magnetic fields!
Strong magnetic fields around linear motor system pose a health risk to persons with implants (e.g. cardiac
pacemakers) that are affected by magnetic fields.

Persons with implants that are affected by magnetic fields should maintain a safe distance of at least 1 m
from linear motor system.
Warning! Risk of crushing from strong forces of attraction!
Strong magnetic forces may attract steel or iron objects from the linear motor system and cause crushing!

No heavy (> 1 kg) or large (> 0.01 m
2
) steel or iron objects should be introduced by hand into the immediate
surrounding area (50 mm) of the magnet track!

Use suitable tools only.
Warning! Risk of crushing from moving forcer housing!
The forcer housing may cause damage to limbs through its movement at the end position of the machine.

The operator should provide protective equipment to prevent from reaching into the danger area of the
machine!
Warning! Risk of burns!
The motor heats up during operation and thus touching the motor can lead to burns!

Provide protective devices and warning notices at the motor!
Attention! Risk of physical damage to watches and magnetic storage media.
Strong magnetic forces may destroy watches and magnetisable data storage media near to the linear motor
systems!

Do not bring watches or magnetisable data storage media into the vicinity (<300 mm) of the linear motor
systems!
Attention! Damage of the linear motor system!
Danger of material damage through uncontrolled movements of the forcer housing in the case of a power cut!

Ensure that the dampers are fitted in the end positions on both sides of the linear motor system!

No heavy load on the cover!

No moving the forcer housing!
Note:
The operator should provide a controller pursuant to EN ISO 12100 that prevents the machine from being started
up unintentionally after power is restored, troubleshooting or the machine is stopped.