User Manual
Safety Instructions
EM1 Series AC Servo Motors
EM1-01-0-EN-2110-MA
Page
13
of
72
Motor can be stored for up to two years indoor with the following conditions:
–
Dry
–
Dust-free
–
No vibration
–
Good ventilation
–
Resistance to extreme weather
–
Indoor air does not contain corrosive gas
–
Prevent motor vibration and moisture
If no dry storage environment is available, the following measures need to be taken:
–
Wrap the motor with moisture-absorbing material, and then seal the motor.
–
Put desiccant in the sealed package; the desiccant needs to be checked and replaced if
necessary.
Check the motor regularly.
Table 3.3: Storage Conditions
Environmental parameter
Unit
Value
Air temperature
(
°
C)
-15 ~ 70
Relative humidity
(%)
20 ~ 80
Rate of change of temperature
(
°
C/min)
0,5
Air pressure
kPa
70 ~ 106
Condensation
-
Not allowed
Formation of ice
-
Not allowed
Store the motor in an environment with good protection. (indoor/factory)
3.3.2.3
Transportation
Attention!
Risk of Personal Injury or Damage to Property.
Follow the precautions of AC servo motor transport conditions:
Carefully move the products to avoid damage.
Do not apply excessive force to the product.
Do not stack the products to avoid collapse.
Transport conditions must comply with EN 60721-3-1 (Refer to Table 3.4)
Table 3.4: Transportation Conditions
Environmental parameter
Unit
Value
Air Temperature
(°C)
-15 ~ 70
Relative Humidity
(%)
20 ~ 80
Rate of Change of Temperature
(
°
C/min)
0,5
Condensation
-
Not allowed
Formation of Ice
-
Not allowed
Transport the motor in an environment with good protection. (indoor/factory)
