8
Basic safety notices
Assembly Instructions
Linear Tables HT-L
HTL-01-0-EN-1905-MA
2.
Basic safety notices
This chapter serves to ensure the safety of everyone working with the linear tables HT-L and those who assemble, install,
operate, maintain or disassemble them. Non-compliance with the following information results in dangerous working
conditions.
WARNING!
2.1 Intended use
The linear tables HT-L combine guiding and drive functions in the one compact unit. They are designed for the precise
positioning in terms of time and location of fixed mounted loads within an automated system. They are specifically ideal
for applications requiring high dynamic responses and precision. Also, with these linear tables large travel distances can be
realised.
Linear tables HT-L may only be installed horizontally and may only be used for the intended purpose as described:
|
All HT-L linear table sizes are subject to performance limits (see catalogue „Linear Axes and Axis Systems HX”).
These performance limits may not be exceeded during operations.
|
The linear tables HT-L must not be operated in potentially explosive atmospheres.
|
The linear tables HT-L may only be used and operated indoors.
|
The linear tables HT-L form part of a complete system. Personal safety must therefore be safeguarded beyond the
concept for this complete system.
|
Proper use of the linear tables HT-L includes observing the assembly instructions and following the maintenance and
repair specifications.
|
Use of the linear tables HT-L for any other purpose shall be considered improper use.
The linear tables HT-L are delivered as a system (guiding/drive). Therefore observe the whole documentation for this system.
The provided documentation may vary depending on the linear axis type.
2.2 Reasonably foreseeable misuse
Linear tables HT-L must not be operated:
Î
outdoors
Î
in potentially explosive atmospheres
2.3 Conversions and modifications
Conversions or modifications to the linear tables HT-L are not permitted!
2.4 Residual risks
During normal operation, there are no residual risks associated with the linear tables HT-L because they form part of the
complete system and the operator must safeguard personal safety beyond the concept for this complete system. Warnings
about risks that may arise during maintenance and repair work are provided in the relevant chapters.
