INTRODUCTION
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
21
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
21
HITRON CGN USER’S GUIDE
If your computer is configured to get an IP address automatically, or if you are not
sure, try to log in to the CGN (see
Logging into the CGN
on page
22
).
If the login screen displays, your computer is already configured correctly.
If the login screen does not display, either the CGN’s DHCP server is not active
or your computer is not configured correctly. Follow the procedure in
Manual IP
Address Setup
on page
21
and set your computer to get an IP address
automatically. Try to log in again. If you cannot log in, follow the manual IP
address setup procedure again, and set a specific IP address as shown. Try to
log in again.
NOTE:
If you still cannot see the login screen, your CGN’s IP settings may have
been changed from their defaults. If you do not know the CGN’s new address,
you should return it to its factory defaults. See Resetting the CGN on page
24. Bear in mind that ALL user-configured settings are lost.
1.4.1
MANUAL IP ADDRESS SETUP
By default, your CGN’s local IP address is
192.168.0.1
. If your CGN is using the
default IP address, you should set your computer’s IP address to be between
192.168.0.2
and
192.168.0.254
.
NOTE:
If your CGN DHCP server is active, set your computer to get an IP address
automatically in step 5. The CGN assigns an IP address to your computer.
The DHCP server is active by default.
Take the following steps to manually set up your computer’s IP address to connect to
the CGN:
NOTE:
This example uses Windows XP; the procedure for your operating system
may be different.
1
Click
Start
, then click
Control Panel
.
2
In the window that displays, double-click
Network Connections
.
3
Right-click your network connection (usually
Local Area Connection
) and click
Properties
.
4
In the
General
tab’s
This connection uses the following items
list, scroll
down and select
Internet Protocol (TCP/IP)
. Click
Properties
.
