INTRODUCTION
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
20
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
20
HITRON CGN USER’S GUIDE
When you turn on the CGN, the LEDs light up in the following order:
Power
US
DS
Status
The
ETH 1~4
LEDs light up as soon as there is activity on the relevant port, and
the
WIRELESS
LED lights up once the wireless network is ready.
USB
WIRELESS
1.4
IP ADDRESS SETUP
Before you log into the CGN’s GUI, your computer’s IP address must be in the same
subnet as the CGN. This allows your computer to communicate with the CGN.
NOTE:
See IP Addresses and Subnets on page 27 for background information.
The CGN has a built-in DHCP server that, when active, assigns IP addresses to
computers on the LAN. When the DHCP server is active, you can get an IP address
automatically. The DHCP server is active by default.
DS
Green, blinking
The CGN is searching for a downstream frequency
on the
CABLE
connection.
Green, steady
The CGN has successfully located and locked onto
a downstream frequency on the
CABLE
connection.
Blue, steady
The CGN is engaged in channel bonding on the
downstream connection.
Off
There is no downstream activity on the
CABLE
connection.
Power
Green
Cable modem is plugged in to an electrical outlet
and is and receiving power
Off
The CGN is not receiving power.
Table 3:
LEDs
