26
IOM ACHA-ACHBA_201a1201_208000_180901_EN
ACHA / ACHBA
PACKAGED COMPACT
HORIZONTAL AIR - AIR
OPERATION
pGD1 or Mini PGD THERMOSTAT
Optional controller in standard models and as standard in models with accessories: Free Cooling, etc.
There are two different versions of the software depending on the models:
1.
HIT005 version
models with complements/ optionals, which require that the pGD1 controller comes as standard.
2.
HITSAA01 version
models that have Pgd1 or Mini PGD as optional.
The different menus or displays
of the controller mainly differ that in HIT005 version is organized by number (1, 2, 3…) and HITSAA01 by
letters (A, B, C…).
KEYBOARD
ALARM KEY:
Press for display the alarms on the screen, if the key is lighted in red color (only PGD1 control)
means that there is some alarm on the unit.
PROGRAM KEY:
Press to enter to the general menu, the main menus are displayed.
ESCAPE KEY:
Goes back one level in any submenu, help is shown in the main screen.
UP KEY:
Movement on the menus or modification of the values of the regulation parameters.
ENTER KEY:
Confirmation of the introduced values.
DOWN KEY:
Movement on the menus or modification of the values of the regulation parameters.
To modify one value, you will have to navigate until the menu where the value is, press “Enter” until it is selected (every time that you
press “Enter” the cursor will alternate between the different values of the screen), once the value is selected, you will modify it by pressing
the “UP” and “DOWN” keys, and press “Enter” to confirm the changes and press “Esc” to leave.
On / Off
On the general menu select START/STOP (On/Off unit),
place in On or Off and press “Enter”.
Temperature adjustment
On the general menu select SETPOINT, a screen will appear on which you will be able to modify the value.
System operating modes change
Control of the unit with accessories (HIT005, pGD as standard):
In "General Menu" select the submenu "WINTER/SUMMER", change the operation mode
on this menu.
Control of the standard unit (HITSAA01, pGD optional): In "General Menu" select the submenu "unit
On/Off", change the operation mode on this menu.
