Hitachi ZX200-5G Workshop Manual Download Page 11

Page: 11 / 502

General Precautions for Cab



Before entering the cab, thoroughly remove all dirt and/

or oil from the soles of your work boots. If any controls

such as a pedal is operated while with dirt and/or oil on

the soles of the operator’s work boots, the operator’s foot

may slip off the pedal, possibly resulting in a personal

accident.



Do not leave parts and/or tools lying around the

operator’s seat. Store them in their specified locations.



Avoid storing transparent bottles in the cab. Do not

attach any transparent type window decorations on

the windowpanes as they may focus sunlight, possibly

starting a fire.



Refrain from listening to the radio, or using music

headphones or mobile telephones in the cab while

operating the machine.



Keep all flammable objects and/or explosives away from

the machine.



After using the ashtray, always cover it to extinguish the

match and/or tobacco.



Do not leave cigarette lighters in the cab. When the

temperature in the cab increases, the lighter may

explode.

SAFETY

SA-5

Summary of Contents for ZX200-5G























































































































































































































































































































































































































































































































Search results

Summary of Contents for ZX200-5G

Reviews:

Related manuals for ZX200-5G

Brands by name

Popular brands

Hitachi ZX200-5G, Workshop Manual

Search results

Summary of Contents for ZX200-5G

Reviews:

Related manuals for ZX200-5G

Brands by name

Popular brands