-20-
• Mounting the paddle lever
Fig. 8
Paddle Lever
[42]
ON side
OFF side
Lock button
Lock button
Spring
Trigger rib
Trigger
3. Mounting the paddle lever
(1) Pay attention to the following when mounting the Paddle Lever
[42]
to housing (A).
•
Mount the Paddle Lever
[42]
turning the lock button to ON.
•
Align the trigger rib with the groove of the housing.
•
Do not lose the spring.
4. Mounting housing (A).(B) set
(1) Apply silicone rubber (THREEBOND 1211) to the specified portions of housing (A) (diagonally shaded
areas) as shown in Fig. 9 before mounting the parts to housing (A).
(2) After application of silicone rubber (THREEBOND 1211) to housing (A), mount the Strap (Black)
[43]
.
Apply silicone rubber (THREEBOND 1211) to housing (B) in the same manner.
(3) Tighten the eight Tapping Screws (W/Flange) D4 x 20 (Black)
[26]
. Wipe off silicone rubber protruded
from the housing with a cloth.
Silicone rubber (THREEBOND 1211) application area
(diagonally shaded area)
Housing (A)
Housing (B)
• Application of silicone rubber
Fig. 9
