16
English
Display
Content
Before measuring
----- m
----- m
After measuring
side A
1.862 m
1.862 m
→
Side A measurement
→
Side A measurement
After measuring
side B
5.039 m
5.372 m
→
Calculated result of
side C
→
Side B measurement
Deleting
a
measurement
(Fig.
2)
Press the power on/o
ff
(clear) button on the operation panel to delete
a measurement.
Turning
on
the
display
light
(Fig.
2)
Press the display light button to turn the green backlight on and o
ff
.
The backlight goes o
ff
automatically after approximately 8 seconds if
no button is pressed.
The backlight cannot be turned on and o
ff
while measuring.
Muting
the
beep
(Fig.
2)
Press and hold the memory button on the operation panel for at least 2
seconds to turn the beep on and o
ff
.
Changing
the
unit
(Fig.
2)
Press the unit select button on the operation panel to change the
measurement unit.
Turning
o
ff
the
power
(Fig.
2)
Press and hold the power on/o
ff
(clear) button on the operation panel
for at least 2 seconds to turn the power o
ff
.
6.
Saving,
adding,
subtracting
and
deleting
a
measurement
Saving
(Fig.
2,
3)
Press the memory button to save the measurement indicated on
the display. [=] appears in the top row of the display and the saved
measurement is indicated next to it.
The saved measurement is not deleted when the power is turned o
ff
and it is indicated in the top row of the display the next time the power
is turned on.
Adding
(Fig.
2,
3)
A new measurement can be added to a previous measurement already
stored in the memory.
Press the add button when a measurement is displayed. The calculated
result and [+] next to it blink 3 times in the top row on the display.
Measurements in di
ff
erent units (m, m
2
, m
3
) cannot be added.
Subtracting
(Fig.
2,
3)
A new measurement can be subtracted from a measurement already
stored in the memory.
Press the subtract button when a measurement is displayed. The
calculated result and [–] next to it blink 3 times in the top row on the
display.
Measurements in di
ff
erent units (m, m
2
, m
3
) cannot be subtracted.
NOTE
○
You can continue adding or subtracting when a measurement is
indicated on the display.
○
Pressing the memory button when a measurement is already saved
in the memory and the latest measurement is shown on the display
deletes the existing measurement.
Deleting
a
saved
measurement
(Fig.
2,
3)
1
Press the memory button to move the measurement indicated on
the display to the top row.
2
Press the power on/o
ff
(clear) button to delete the memory.
CHECKING
THE
ACCURACY
(before
and
after
use)
If the accuracy is found to be faulty, contact the dealer for repairs.
WARNING
Be sure to check the following before and after use.
Using the instrument in a faulty condition may lead to errors.
Checking
repeated
measuring
accuracy
1
Fix the position of the instrument and measure a distance of
approximately 1 m to 5 m ten times.
000Book̲UG50Y̲EE.indb 16
000Book̲UG50Y̲EE.indb 16
2009/08/20 12:31:39
2009/08/20 12:31:39
