Hitachi SJ100 Series Service Manual Download Page 11

Page: 11 / 75

2. Measurement of the Internal Voltage Supply

There are PV5L, PV24L and NV12L internal DC voltage supplies. These supplies are isolated from the

main high voltage portion. And it is not possible to measure DC voltages at the non isolated portion.

Please make measurements for above mentioned voltages for the isolated portion.

PV5L supply voltage

Supplies 5V for I/O board.
Nominal voltage : min. 4.90Vdc to max. 5.20Vdc
Check PV5(address 1C) <- L

PV24L supply voltage

Supplies 24V to interface voltage supply, which is supplied to input terminals.
Nominal voltage : min. 21.60Vdc to max. 26.40Vdc
Check PV24(address 1A) <- L

NV12L supply voltage

Supplies -12Vdc to remote operator (DOP/DRW’s yellow back light ).
Nominal voltage : max. -10.80Vdc to min. -17.5Vdc
Check NV12(address 3A) <- L

“H” terminal voltage

Suppiles 10V to “H” terminal
Nominal voltage : min 9.5Vdc to max 11.5Vdc
Check “H”

<->

“L” with VR (1kohm)

“Potentiometer function on the front case

Set “A01” :”00”
Monitor “F01” display 0

<->

50(60) with clockwise and anti clockwise.

Cooling FAN voltage (PV24N)

Supplies 24V to cooling FAN .
Nominal voltage min 19.9Vdc to max 27.2Vdc.
Check Red wire

Black wire with the FAN.

Check the FAN working, direction(from down to up).

Check pad of NV12

Check pad of PV24

Check pad of PV5

1 pin of TM2 is “L”common

2-1/E

Summary of Contents for SJ100 Series












































































Search results

Summary of Contents for SJ100 Series

Reviews:

Related manuals for SJ100 Series

Brands by name

Popular brands

Hitachi SJ100 Series, Service Manual

Search results

Summary of Contents for SJ100 Series

Reviews:

Related manuals for SJ100 Series

Brands by name

Popular brands