A–3
Hitachi Simple Modular Storage 100 User’s Guide
•
9. Read the information in the window. Then check
Yes, I have read the
above warning and agree to update the Microprogram
.
10.Click the
Confirm
button to proceed. A window similar to the following
appears as the firmware is updated. The window shows the approximate
duration required to update the firmware.
•
•
11.After the firmware has been updated, a message informs you that the
operation has been completed successfully. Click the
Close
button to
remove the message. You can then return to normal operation.
NOTE:
On arrays with one controller, the
Warning
LED flashes when the
firmware is being updated.
CAUTION! Do not cancel or have your Hitachi Simple Modular
Storage 100 perform I/O operations while the firmware is being
upgraded.
Summary of Contents for Simple Modular Storage 100
