Hitachi Simple Modular Storage 100 User Manual Download

Page: 54 / 100

3–20

Installing Your Array

Hitachi Simple Modular Storage 100 User’s Guide

The Add Array wizard takes you step by step through the process of

discovering arrays on your storage network and adding them to the Storage

Navigator Modular 2 database.

For more information, please refer to the

Hitachi Simple Modular Storage

100 Quick Configuration Guide

(MK-97DF8090) and the Storage Navigator

Modular 2 online help.

Configuring Array Drives (Initial Setup Wizard)

After you finish using the Add Array wizard, you use the Initial Setup wizard

to configure the array’s spare drives. This wizard lets you:
• Enable the array to send email notifications of serious array events
• Set the IP address, subnet mask, and default gateway for each

management port

• Select the type of negotiation to be used
• Set the IP addresses for each data port

After you run the Initial Setup wizard, you edit the management port IP

addresses for the controllers in your array to match the addresses you

specified in this wizard. For more information, please refer to the

Hitachi

Simple Modular Storage 100 Quick Configuration Guide

(MK-97DF8090) and

the Storage Navigator Modular 2 online help.

Creating Logical Units

After you add arrays and configure the array drives, you define the logical

units to be allocated to the host. In this step, you:
• Add the LU to a RAID group
• Enter a LUN number and specifying the amount of free space to be

allocated to the LUN

• Specify a stripe size
• Indicate whether formatting is necessary

For more information, please refer to the

Hitachi Simple Modular Storage

100 Quick Configuration Guide

(MK-97DF8090) and the Storage Navigator

Modular 2 online help.

Summary of Contents for Simple Modular Storage 100





































































































Search results

Summary of Contents for Simple Modular Storage 100

Reviews:

Related manuals for Simple Modular Storage 100

Brands by name

Popular brands

Hitachi Simple Modular Storage 100, User Manual

Search results

Summary of Contents for Simple Modular Storage 100

Reviews:

Related manuals for Simple Modular Storage 100

Brands by name

Popular brands