14
4.4
Operation of Function mode
1. Please select function mode via pressing the [
] or [
]
key at navigation level. The cursor will not appear at this
layer.
2. Press the [SET] key to move to edit layer and the cursor
appears in the character of function group , And pressing
the [
] or [
] key to select the group that you want.
[change of function item of “F”, “A”, “b”, “C”, “H”, “P”, “U”
group]
Pressing the [
] or [
] key to move the cursor to the code
part of function item (F001 as right diagram), then pressing the
[
] or [
] key to change the function code.
3. It entries into the below layer after pressing the [SET] key.
Pressing the [
] or [
] key to select the data which you
want to set. It returns to the upper layer after storing
parameter via pressing the [SET] key. Pressing the [ESC]
key will cancel the change and returns to the upper layer.
F001
[0.00 - 50.00]
FUNCTION M1-STOP ALL
Set Frequency(OPE)
6.00Hz
F
001
[0.00 - 50.00]
FUNCTION M1-STOP ALL
Set Frequency(OPE)
6.00Hz
F00
1
[0.00 - 50.00]
FUNCTION M1-STOP ALL
Set Frequency(OPE)
6.00Hz
F001
[0.00 - 50.00]
FUNCTION M1-STOP ALL
Set Frequency(OPE)
006.0
0
Hz
ESC
SET
×
3
×
3
ESC SET
SET
Chapter 4
Operation
