13
4.3
Operation of Monitor mode B
1. Please select monitor mode B via pressing the [
] or [
]
key at navigation layer. The cursor will not appear at this
layer until pressing the [SET] key.
2. After pressing the [SET] key at navigation layer, it moves
to edit layer and the cursor appears at the first row of the
monitor item. Use the [
] or [
] key to select the row of
monitor item.
3. It entries into the below layer after pressing the [SET] key
and the cursor appears at the function code of the item.
Pressing the [
] or [
] key to select the code. After
pressing the [SET] key, the monitor item is selected, and it
returns to the upper layer. After pressing [ESC] key, the
change is cancelled and returns to the previous display.
MONITOR-B M1-STOP ALL
d00
1
Output FQ
SET
ESC
Output FQ 0.00Hz
Output LLL
MONITOR-B M1-STOP ALL
Output current 0.00A
Input LLLLLLLL
Output FQ 0.00Hz
Output LLL
MONITOR-B M1-STOP ALL
Output current 0.00A
Input LLLLLLLL
SET
ESC
SET
Chapter 4
Operation
