TC-12001
2-133
AIR PANEL
2
WARNING
CAUTION
O
Pay attention to perform the installation work at high-place using a stepladder, etc.
O
Perform securely the installation work referring to this installation manual.
If the installation is not completed, it may cause dew condensation by air leakage, electric shock, a
¿UH
or
injury by falling down the air panel.
O
DO NOT install the air panel where the
ÀDPPDEOH
gases may generate or enter.
It may cause a
¿UH
O
DO NOT put any material on the products. DO NOT step on the products.
It may cause injury due to falling down.
O
Avoid touching a forming agent to the air panel if using the forming agent after installing the air panel.
If the forming agent is touched to the air panel, it may cause a breakage and the falling down the air
panel.
O
Perform securely the electrical wiring work.
If the electrical work is not completed, heat generation at the connection, a
¿UH
or an electric shock may occur.
O
Make sure that the electrical wires are securely
¿[HG
in order not to apply an
H[WHUQDO
force to the terminal
connections of the wirings. If
¿[LQJ
is not completed, it may cause heat generation or a
¿UH
SAFETY SUMMARY
< Signal Words>
O
The following signal words are used to identify levels of hazard seriousness.
'H¿QLWLRQV
for identifying hazard levels are provided below with their respective signal words.
: WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
: CAUTION, used with the safety alert symbol, indicates a hazardous situation which,
if not avoided, could result in minor or moderate injury.
: NOTICE is used to address practices not related to personal injury.
: NOTE is useful information for operation and/or maintenance.
CHECKING PRODUCT RECEIVED
O
Upon receiving this product, inspect it for any shipping damage.
Claims for damage, either apparent or concealed, should be
¿OHG
immediately with the shipping company.
O
Check the model number and accessories to determine if they are correct.
NOTICE
O
DO NOT move the louver by hand. If moved, the louver mechanism will be damaged.
In addition, do not apply an excessive force to the air outlet part to prevent the breakage.
O
DO NOT run the relay wiring for motion sensor at the corner pocket cover and 220-240V of the power source
wires in parallel. It may cause malfunction of motion sensor by noise, etc. (for P-AP160NAE).
WARNING
CAUTION
NOTICE
NOTE
