TC-12001
2-65
4-WAY CASSETTE
P5414946-rev.1
35
x
This “Louver Setting” is NOT available when 2 (two) remote control switches are used in the same H-LINK.
(including the combination with PC-ARF and PC-LH3A (wireless remote control switch))
x
The individual louver setting is available up to 16 indoor units by one remote control switch.
x
The individual louver setting with the same refrigerant cycle are available up to 4 indoor units without the
transition wiring for the remote control switch.
(1) Press and hold “ ” (menu) during the normal mode (when
unit is operated).
The menu will be displayed.
(3) Select “Louver Setting” from the louver setting and press
“OK”.
(4) Select the indoor unit to change the louver direction by
pressing “
” and press “OK”.
(This screen is NOT displayed when the number of
indoor unit connected with the remote control switch is
1 (one). In the case, (5) will be displayed.)
(5) Press “
” and select the louver direction.
The selected louver is opened and the other louvers are
closed.
(6) Press “ ” (menu) while “?” (help) is pressed.
7KHFRQ¿UPDWLRQVFUHHQZLOOEHGLVSOD\HG
(7) Select “Yes” and press “OK”. (5) will be displayed after
WKHVHWWLQJFKDQJHLVFRQ¿UPHG
If “No” is selected and “OK” is pressed, the screen will
return to (5).
* Regarding “Louver Setting”, the louver selected at (5) will
be set as “No.1” and the other louver No. will be changed
FORFNZLVHDXWRPDWLFDOO\DVVKRZQLQWKH¿JXUH
(2) Select “Louver Setting” from the menu and press “OK”.
The louver setting will be displayed.
Menu
Motion Sensor Setting
Total Heat Exchanger SET
VENTI
Louver Open/Close
02
/
03
Louver Setting
15:10(Fri)
ENT.
RTN.
SEL.
OK
OK
Cancel INDV Louver SET
Louver Setting
Louver Setting
ENT.
RTN.
SEL.
OK
Louver Setting
01-01
01-02
01-03
Select unit to set.
01-04
ENT.
RTN.
SEL.
OK
Louver Setting:01-03
Adjust air direction & louver angle.
1
2
3
4
ADJ
SEL.
ENT.
RTN.
Change louver outlet number?
(2 1, 3 2, 4 3, 1 4)
Louver Outlet Setting:01-03
Yes
No
SEL.
ENT.
RTN.
OK
< Individual Louver Setting Procedure >
