75
RE
FR
IG
ER
AT
OR
C
OM
PA
RT
M
EN
T
When keeping food at lower temperatures
(using the “Sensor Cooling” function)
“Sensor Cooling” has two functions:
●
Lower the temperature of the “Low-temperature Refrigeration Space”
(Disabled: About 2 to 6 ˚C
⇒
Enabled: About 0 to 3 ˚C)
Suitable for storing prepared daily dishes.
●
Upon placing a hot food in the “Automatic Rapid Cooling Space” , a sensor detects the
temperature of the food and cools it rapidly.
Even if you put a hot pan, the refrigerator can cool it rapidly, while reducing the impact on other foods.
To put a pan in the “Automatic Rapid Cooling Space” ,
cool it down to a temperature at which one
can touch it with bare hands (50 ˚C or less)
. This can prevent burn injury or shelf deformation.
Low-temperature
Refrigeration Space
Automatic Rapid
Cooling Space
●
Enabling “Sensor Cooling” enables both of the “Low-temperature Refrigeration” and “Automatic Rapid Cooling” functions at the same time. Either of the
functions cannot be enabled.
●
When “Sensor Cooling” is enabled, the regrigerator consumes more power than when disabled. The operating sound may be noisier.
●
When “Sensor Cooling” is enabled, temperature in the Double door pockets is also lower than when disabled.
●
When the Refrigerator Compartment is set to “
■
” or “Energy Saving” , the temperature in the entire Refrigerator Compartment is higher than that for
“
■■
” by about 1 to 3 ˚C. If the Refrigerator Compartment is set to “
■■■
” , the temperature in the entire Refrigerator Compartment is about 0 to 3 ˚C.
●
In the “Automatic Rapid Cooling” mode, the sensor may not be able to detect the temperature of food, depending on the amount or temperature of the food. However,
when “Sensor Cooling” is enabled, the Low-temperature Refrigeration Space is lower than when disabled, allowing you to cool food more quickly.
●
The above temperature in the “Low-temperature Refrigeration Space” is based on the assumption that the surrounding temperature is about 32 ˚C and the
temperatures of the Refrigerator and Freezer Compartments are stable at the “
■■
” setting.
Notice
■
How to enable “Sensor Cooling”
Touch
button on the Control Panel to turn on the
indicator lamp.
All indicator lamps turn on, and then the current settings are displayed.
The Sensor Cooling is set to “Off” at the time of purchase.
Touch and hold
for at least 3 seconds until the
setting sound (beep) sounds to light “Sensor Cool” .
“Sensor Cool” is valid until it is released.
Touch
on the Control Panel to turn on the indicator lamp,
touch and hold
for at least 3 seconds until the setting
sound (2 beeps) sounds to turn off the “Sensor Cool” .
1
2
Ca
nc
el
Touch for
3 seconds
Touch it
(At the time of
purchase)
(At the time of
purchase)
(Setting at time of
purchase)
(Setting at time of
purchase)
Light ON
Light ON
■
How to enable “Spot Powerful Cooling”
Touch
button on the Control Panel to turn on the indicator lamp.
All indicator lamps turn on, and then the current settings are displayed.
The Spot Powerful Cooling is set to “Off” at the time of purchase.
Touch
button to turn on “Spot Cool” indicator lamp.
The operation is automatically stopped in around 60 minutes and the indicator “Spot Cool” display turns off.
Touch
button on the Control Panel to turn on
the indicator lamp, and touch
button to turn off
“Spot Cool” indicator lamp.
1
2
To c
anc
el it
●
When “Spot Powerful Cooling” is set, the amount of power consumption is greater than
when it is released.
●
Continuous use of "Spot Powerful Cooling" may freeze foods in the refrigerator.
●
It can be also used even when the “Sensor Cooling” is set.
When you want to quickly cool the foods.
(using the “Spot Powerful Cooling” function)
When you want to quickly cool the foods, operate to strengthen the cooling of
the “Automatic Rapid Cooling Space” .
It can reduce the time for cooling warm foods and the removal of heat just after cooking.
It is recommended when you want to quickly cool a lunch box or drinks as well as vegetables before going
out just after cooking. When storing warm foods, cool it to
a temperature that can be touched by hand (50˚C
or less)
and then put it in. It can prevent burns or shelf deformation.
Automatic Rapid Cooling Space
・
Spot Powerful Cooling Space
Notice
BB0055761M_R-ZXC740KH_A.indd 75
19.8.7 4:57:36 PM