69
If there is software to update, the wireless LAN feature can be used to update the unit software.
On the updating the unit’s software
Caution at updating
Set the updating of the unit software
・
In order to update the unit software, it is necessary to set the pairing via a wireless LAN router.
Pg.63
・
Software cannot be updated when the power is off.
・
If the unit software and the application are updated, depending on the contents of the update, the actual status may be different from the contents
described in this document.
・
While updating the unit software, it cannot be operated.
While updating, “
” and
blink.
The update starts automatically according to the operating status of the refrigerator.
・
It takes about 5 to 10 minutes to update the unit software.
・
Do not turn off the power while updating the unit software.
It may cause failures such as inability to supply power, inability to operate, and inability to operate from a
smartphone.
・
If the power is turned off while updating due to a power failure, and etc., the unit will automatically switch
to recommence updating after power failure recovery.
Do not turn off the power until the update is complete.
Blinking
Blinking
Tap “MENU”
Tap “Version” and select “Unit Version No.”
Set “Automatic software update” as ON
The update starts automatically according to the operating status of the refrigerator.
1
2
3
HO
W
T
O U
SE
T
HE
A
PP
LIC
AT
IO
N (
CO
NT
IN
UE
D)
Operate the application
Operate the application
Operate the application
1
3
2
BB0055761M_R-ZXC740KH_A.indd 69
19.8.7 4:55:48 PM
