35
ENERGY SAVING / MAINTENANCE
MAINTENANCE
Power plug
Once or twice a year
The back/fl oor of the refrigerator
Once or twice a year
Surface of door
Once a month
Liquid receivers
Once a month
Door gaskets
Once a month
Case
Once per three months
Unplug the power plug and remove
dust with a dry cloth.
Remove the leg covers,
raise the adjustable mounts
from the fl oor, pull the refrigerator
toward you, and then wipe off dirt.
Wipe the surface of door using
a soft cloth wet by lukewarm
water, and then wipe off water
with a dry cloth.
Use a soft cloth wet by
lukewarm water to wipe off.
Wipe off them if liquid collects
and/or they becomes dirty.
Use a soft cloth wet by
lukewarm water to wipe off.
Use a soft cloth wet
by lukewarm water to
wipe off.
To prevent fi re or electric shock.
Pg.4
・
The back of the refrigerator easily becomes dirty
because fi ne dust is accumulated on it by convection of air.Lay the
protection board etc. on the fl oor which can be easily scratched.
・
If you care about vibrating sound, or about discoloration or dirt
caused by humidity on a wall behind, install the refrigerator so as to
form a gap of 2 cm or more.
Remaining adhesives on glass surfaces, if any,
can be removed clearly by using a plastic eraser
to rub it and then wiping it off with a dry cloth.
Alkaline glass detergent, Mild alkaline kitchen detergent (other
than neutral), Chlorine bleaching agent
Scrubber, Polishing sponge,
Chemical wipe
Polishing powder,
Washing powder
Hot water
Benzin, Thinner, Alcohol
Wipe it thoroughly because it can become
easily dirty.
For how to remove
Pg.39
Liquid receivers
●
Do not use the following items because it may cause damage and discoloration of the door, paintwork, plastic parts and glass surface
Check the “Liquid Property fi eld” of your detergent displayed in accordance with Household Goods Quality Labeling Act.
●
Make sure to wipe off spilled cooking oil, citrus fruits juice and food soup. Because it may cause damage and discoloration of the door, paint work
and plastic parts.
●
Do not wipe off lubricant applied to movable contact surfaces of cases and rails for the slide door.
●
When a magnet or suction cup is attached on the side surface of the body or the surface of a door, it may leave some mark.
●
When unplugging the power plug, the settings of the Control Panel may be released. So check the settings.
Request
●
Make sure to unplug the power plug when maintaining the refrigerator.
Warning
■
When dirt is found
●
Wipe off it immediately. It is recommended to clean the hidden places once a year.
Each shelf/pocket
Once per three months
Use a soft cloth
wet by lukewarm
water to wipe off.
For how to remove
Pg.38
