Hitachi PV-XEH900, Instruction Manual

Page: 31 / 40

E-31
Rotary brush maintenance.
1
2
3
4
Remove the brush holder.
Detach the rotary brush and roller and remove dust.
Adjust the rotary brush and roller with the groove and attach them to their original positions.
Attach the brush holder.
Flip over the power head and open the lever. Remove the brush holder.
Adjust the rotary brush with the groove
and attach it to its original position. Adjust the shorter shaft of the roller (green side) with the
hole and attach it to its original position.
Insert the hook. Attach the brush holder. Close the lever.

Do not use cleansers, bleach, etc. Doing so might cause discoloration, deformation, etc.

After washing with water, thoroughly air dry it in the shade before attaching it.
Drying it requires approx. 24 hours. (The drying time varies depending on the environment and season.)
Note
Wash with water. Shake to remove excessive water. Thoroughly air dry.
To wash the rotary brush and roller with water
The lengths of
the left and right
shafts of the roller
are different.
Check them
before attaching.
Note
When attaching the brush holder, fasten the hook first. Failure to do so might cause damage. Note
Remove excess water from the rotary
brush as well and swab it with a dry cloth.
After drying, the
roller might fluff but it
can be used as it is.
Lean them against an
object to dry in the shade.
Lever
Brush holder
Rotary brush
Roller
Remove dust.
Groove
Tweezers
Remove the dust tangled in the
groove using tweezers, etc.
Scissors
Cut and remove dust
tangled in the rotary brush
or roller using scissors, etc.
Groove Hole Shaft
Shorter shaft
(green side)
Hook
Maintenance