E-30
Air inlet
Rotating sections
Crevice brush
Rotary brush
Safety switch
Wheels
Brushes
Brushes
Wheels
Roller
Wheels
Crevice brush
Rotating sections
Shafts
Tweezers
Scissors
Tweezers
Wheels
Rotary brush Roller
Safety switch
Remove the dust
tangled in the shaft
using tweezers, etc.
Cut and remove the
dust tangled in the
rotary brush or roller
using scissors, etc.
Vacuum attached dust using the crevice brush and others.
Remove tangled dust using tweezers, etc.
Remove attached dust.
Remove tangled dust
Maintaining the power head
CAUTION
Risk of injury.
Detach from the body, extension pipe, smart hose when performing maintenance.
CAUTION
Risk of damage to the floor.
If dust gets tangled in the wheels, the wheels cannot rotate, which might cause wear and tear and
floor damage.
The "brushes, wheels, rotary brush, or roller" might be worn out due to long-time usage, etc.
Using the power head while they are worn out might damage the floor. You cannot replace the
"brushes and wheels" by yourself, so please consult with the dealer where you purchased the
cleaner to replace them at a time. You can purchase the "rotary brush and roller" as replacement
parts.
→
(P.E-39)
Do not subject the safety switch or roller to excessive force. Doing so might cause damage.
Note
Maintenance
(Continuation)
Perform maintenance when suction power is weak or when you are concerned about dirt.
We recommend periodic maintenance (about once a month).
Dust stuck to the safety switch, rotary brush, roller, brushes, wheels, air inlet, and rotating sections might
cause reductions in suction power or malfunctions.
Summary of Contents for PV-XEH900
Page 40: ...E 40 ...
