E-9
To prevent malfunctions, etc., follow the directions below.
Also, for proper use, please read the
Note
thoroughly.
Do not subject the body, the power head, extension pipe, charging
station, or attachment accessories to strong physical shock.
Doing so might cause deformation or damage.
Do not vacuum the following objects.
Failure to do so might cause abnormal odors or malfunctions.
· Water or liquids · Wet objects · Desiccants (moisture absorbents)
· Large amounts of sand or powder · Long threads · Glass
Do not ride on the body, power head, or the charging station.
Doing so might cause malfunctions.
Thoroughly air dry parts washed with water.
Failure to do so might cause abnormal odors or malfunctions.
Do not remove the battery while the cleaner is
operating or while it is set in the charging station.
Doing so might cause malfunctions.
Notes on use
Control part and indicator part
Control switch
Indicator lamp during charging
To operate
The LED lights of the body, power head,
and smart hose turn on.
→
(P.E-2, E-3)
For careful carpet cleaning
For normal cleaning
To stop operation
Press the or button.
Press the button.
To stop rotating the rotary brush
Control switch
When you press and hold the button for
5 seconds or more during operation, the
operating rotary brush stops. To resume,
press and hold the button for 5 seconds
or more.
* When the rotating rotary brush stops, the LED
lights for the power head turn off.
Charging status
* When the battery indicator lamp quickly flashes (about four times
per second), there is a problem with the charging station or battery.
→
(P.E-37 )
* If you remove the body from the charging station while the battery
indicator lamp is off and then set it on the charging station again, the
battery indicator lamp will turn on, which is normal.
* If you remove the battery while charging, after a short time, the
indicator lamp flashes (about four times per second). Remove the
body from the charging station, fully attach the battery, and set the
body in the charging station again.
The battery is charging.
Charge time is approx. 3.5 hours. Depending on
the ambient temperature, usage time, and other
usage conditions, if the battery's temperature is
very hot, charging may automatically go into
standby until the temperature lowers to an
appropriate temperature for charging, causing
the charging time to increase.
Charging is complete (fully charged).
When charging is complete, it turns off.
On
Off
Battery indicator lamp
Battery indicator lamp
Safety
pr
ecautions
Notes on
use
Contr
ol part and
indicator part
Summary of Contents for PV-XEH900
Page 40: ...E 40 ...