Hitachi PV-XEH900, Instruction Manual

Page: 19 / 40

E-19
Handy nozzle
Hard brush
Match the position of the projection on the side
of the handy nozzle with the groove on the body. Press the recess and projection of the handy
nozzle and pull in the direction of the arrow.
Press in the direction of the arrow.

It might be damaged if excessive force is applied.
If the handy nozzle is pressed down on floors with too much force, it might become damaged or crack.

Do not strongly press the handy nozzle against the floor since it might leave a mark on the floor.
If the handy nozzle leaves a mark on the floor, refrain from using it at that location, and remove the
mark using soft cloths, etc.

The handy nozzle can be washed with water. After washing, allow it to dry naturally before use.
Using it while wet might lead the body to malfunction.
Note
CAUTION
CAUTION
Risk of damage
Do not press against areas that are particularly easy to be damaged, such as pianos.
Risk of electric shock, fire, malfunction or damage.
Do not clean using the tip of the body without the handy brush.
WARNING
Risk of injury
When changing the angle, do not hold the rotating section.
Your hand might get pinched.
Attach to the body before use.
Attachments can be applied while the handy nozzle is attached to the body.
This hard brush can be used to remove stains around your front entrance hall and from the floor mats in your car.
The angle can be changed depending on the location you are cleaning.
How to attach
How to detach
How to clean
Groove
Handy nozzle
Protrusion
2
1
Recess and
projection
You can change the angle.
Rotate section