--- 34 ---
(b) Reassembly
Disassembly procedures should be followed in
the reverse order. Note the following points:
Hang the hook of the Ribbon Spring [85] on
the edge of the Magazine [74] and put the nail
feeder ass'y in the Magazine [74]. Then
secure the nail feeder ass'y with the pin
temporarily (Fig. 36).
Mount the Spring [60] and the Washer [61] to
the Shaft [59] facing the larger winding
diameter side of the Spring [60] to the Washer
[61] (Fig. 37).
Fig.38
Ribbon Spring [85]
Magazine [74]
Pin
Window of the
Magazine [74]
End of the Shaft [59]
Washer [61]
End surface of the Magazine [74]
Insert the Shaft [59] into the Magazine [74] until the end of the Shaft [59] is shown underneath the Ribbon
Spring [85]. Mount the Washer [61] at the other end of the Shaft [59] to the end surface of the Magazine [74]
(Fig. 38).
Ribbon Spring Hook
Magazine [74]
Nail Feeder Ass'y
Pin
Ribbon Spring [85]
Fig.36
Fig.37
Larger diameter side of the Spring [60]
Shaft [59]
Spring [60]
Washer [61]
Summary of Contents for NR 65AK
Page 46: ...MEMO ...
Page 47: ......
