--- 31 ---
10-5. Disassembly and Reassembly of the Cap and the Magazine Section
(1) Disassembly and reassembly of the Cap [35] (See Fig. 32.)
[Tool required]
Hex. bar wrench (4 mm)
Cap [35]
Gasket (B) [34]
Body Ass'y [18]
Fig. 33 Disassembly and reassembly of the nail feeder
Fig. 32 Disassembly and reassembly of the cap
Hex. Socket Hd. Bolt M5 x 16 [36]
(a) Disassembly
Remove the three Hex. Socket Hd. Bolts M5 x 16 [36] with the hex. bar wrench so that the Cap [35] and
Gasket (B) [34] can be removed.
(b) Reassembly
Disassembly procedures should be followed in the reverse order.
(2) Disassembly and reassembly of the nail feeder (See Fig. 33.)
[Tool required]
Roll pin puller (3 mm (0.118") dia.)
Roll Pin D3 x 10 [79]
Pin [82]
Nail Feeder [83]
Ribbon Spring [85]
Feeder Spring [84]
Feeder Plate [81]
Pushing Lever Stopper [80]
Summary of Contents for NR 65AK
Page 46: ...MEMO ...
Page 47: ......
