Hitachi LQE550, User Manual

Page: 60 / 99

4 OPERATION
4-15
④
The [[Offline] PCs edition] window as shown below will appear.
Figure 4-16 [[Offline] PCs edition] Window
In this window, add the desired changes to the existing parameter settings (see Step ④
in “(1) Procedure for setting and editing parameters in online mode” for details) and then
click the Write button. All of the specified parameter values will then be saved to
the desired file (which was specified or selected in Step
② if they are all error-free;
otherwise, they will not, in which case an error message will be displayed.
If an error message is displayed, remove the cause of the error and then click the Write
button again.
If you want to exit this command without saving the specified parameter values, just click
the Cancel button instead. An exit confirmation dialog box will then appear. If
you click the Yes button, the [[S10V] CPU LINK SYSTEM] window will become
active again.
If you click the No button instead of [Yes], the [[Offline] PCs edition] window will
become active again.
Figure 4-17 An Exit Confirmation Dialog Box