Revision A June 27, 2011
5 / 49
1. Introduction
Hitachi KP-H5010 type outdoor housing camera is a surveillance camera which
built-in 1680mm (x55) power zoom lens and the single CCD brings high sensitivity
and high resolution picture. Besides power zoom function, auto focus function is
installed as standard. The removal effect of the fog is obtained by the Adaptive Fog
Reduction function.
2. Operating considerations Notes to users
1) Power supply
Use this camera with a 24VDC power supply. Time will be needed for about five seconds by the
time the camera works normally after turning on the power supply.
2) Handling
Do not attempt to remove cover.
3) Installing and storage
Avoid installing or storing the camera in the following environments.
a. Environments where combustible or corrosive gas exists.
b. Excessively warm or cold environment (Operating ambient temperature: -26 to 51
℃
).
c. Place subjected to excessive vibration or shock.
d. Environment exposed to strong electric or magnetic field.
e. Do not aim the camera lens at the sun.
f. Do not shoot strong light.
4)
To obtain stable performance for long time
When the camera is used continuously for long time
under high ambient temperature, the inside
electrical parts become deteriorated, resulting in shortening its life.
To use the camera
continuously for long time, the highest temperature must be below 60
℃
.
5) Cleaning
a. Use a blower or a lens brush to remove dusts on the lens or the front glass.
b. Wipe dirt on the case off with dry soft cloth. If dirt is hardened, wipe them off with cloth
Moistened with neutral detergent liquid; wipe the cover with dry cloth.
c. Do not use benzene, thinner, alcohol, liquid cleaner or spray-type cleaner.
3. CCD characteristics
The following phenomenon is not defects but might occur due to characteristics of CCD.
1) Smear and blooming
This phenomenon occurs when strong light object (fluorescent lamp, car head light, strong
reflection of the sun light etc) is captured. Thin band at monitor screen is displayed above and
below of the strong light object. In this case, please change the camera angle in the position where
strong light does not enter in the camera.
2) Fixed pattern noise
Fixed pattern (vertical strip, white pixel spots, rough sprinkling) might be appearing on the monitor
screen, when camera is operated at high temperature. It becomes easy to see at high sensitivity
setting (AGC, electronic sensitivity improvement) of camera.
Summary of Contents for KP-D5010-S1
Page 48: ...Revision A June 27 2011 48 49 ...
