Revision A June 27, 2011
33 / 49
Note
a) Sensitivity goes up when the sensitivity enhancement is increased, but when taking picture of
subject with a fast movement, the blur of the image (after image) grows too.
b) Sensitivity goes up when the sensitivity enhancement is increased, but the noise of image is
also increases. Morever, if the surrounding temperature is high, amount of the noise might
increase.
c) White pixel might be there at the time of sensitivity enhancement operation. This is not a
defect.
d) Turn
ON
the
DNR
when the noise stands out with sensitivity improvement. The afterimage
might stand out when taking picture of subject with a fast movement. At that time, switch
the
DNR
setting to
OFF
.
Color-B/W selection (B/W mode)
Sensitivity enhancement by Color-B/W selection (B/W mode)
1) MODE setting
a) The OPEN command is transmitted and MAIN MENU is opened.
b) Use the Up and Down buttons to move the cursor [
>
] to
B/W MODE.
c) It changes into the following display if the SET command is transmitted, B/W MODE MENU is
displayed.
d) Use the Up and Down buttons to move the cursor [
>
] to
MODE.
e) In this state, push the SET command to change the shutter speed as follows.
Set command:
OFF
→
ON
→
AUTO(H)
→
AUTO(M)
→
AUTO(L)
OFF:
This mode is of color picture. (factory setting)
ON:
This mode is of black and white picture.
AUTO:
In this mode, color image black and white image is changed automatically
according to the brightness of subject. It is the brightness (picture level) that
displayed inside ( ) when color image is changed to black and white image.
Main menu
◆
ＭＡＩＮ ＭＥＮＵ
◆(FILE1)
ＬＩＧＨＴ ＣＯＮＴＲＯＬ：AVE
↵
ＡＧＣ ：ＯＮ
↵
ＳＨＵＴＴＥＲ ＳＰＥＥＤ：１／６０
ＳＥＮＳ ＵＰ ：ＯＦＦ
>
Ｂ／Ｗ ＭＯＤＥ ：ＯＦＦ
↵
ＷＨＩＴＥ ＢＡＬＡＮＣＥ：ＡＴＷ
↵
ＣＡＭＥＲＡ ＴＩＴＬＥ ：ＯＦＦ
↵
ＥＮＨＡＮＣＥ
↵
ＳＵＢ ＭＥＮＵ
↵
ＥＮＤ
……Scene file setting
……Light control menu
……AGC setting menu
……Shutter speed setting
……Sensitivity enhancement Setting
……Color-B/W mode setting
……White balance setting
……Camera title menu
……Enhance setting menu
……Sub menu
……End (Menu display off)
◆ B/W MENU ◆
>
M O D E ：O F F
BURST ：ON
MONO→COLOR ： 010
COLORR→MONO ： 005
ＲＥＴ
ＥＮＤ
……B
／
W mode
……Burst setting
……
B/W to color mode change time setting
……
Color to B/W mode change time setting
……Return to Main menu
……End (Menu display off)
B/W setting menu
Summary of Contents for KP-D5010-S1
Page 48: ...Revision A June 27 2011 48 49 ...
