manualshive.com logo in svg

Hitachi IJ UX, Instruction Manual, Page: 36 / 262

Share
Download
Hitachi IJ UX Instruction Manual Download Page 36

3-9 

●

Start operation

TEST

START PRINTING

STARTUP

SETTINGS

LOGIN

Ink Jet Startup Confirmation

No.050

CONFIRMATION

×

               The ink jet will be turned ON.

Solution  1. To change the printer status to Ready, press <Ready>.
               2. To change the printer status to Standby, press <Eject ink>.

Ready

Cancel

Eject ink

Use this procedure when you want to eject ink from the nozzle for a purpose other than printing.
(Use only during maintenance. To print, press the  STARTUP       

→

  Ready .

Press the  STARTUP       

→

  Eject ink . 

Ink ejection for maintenance

●

 Operation can be aborted by pressing the  Cancel   at the “Ink Jet Startup Confirmation message”.

●

 If the print head cover installed, the printer will not enter the Ready state even if this operation is 

    performed. (Enters the Standby state)

Press  Eject ink .

Press  STARTUP .

Summary of Contents for IJ UX







































































































































































































































































Reviews:

No comments