8-8
●
Replenishing the makeup
8.2 Replenishing the makeup
(1) Overview
●
Makeup can be refilled when the remaining makeup icon is at the position which indicates that the
cartridge bottle can be replaced.
●
Replenish the makeup in the makeup reservoir within 60 minutes after a Makeup Low warning is
generated. If replenishment is not performed, the printer will stop.
●
When the makeup is replenished, the warning is automatically reset.
●
Makeup can only be refilled while the power is ON.
Remove the over cap of a makeup cartridge bottle.
The over cap is a cap that is necessary at storage.
It is unnecessary at ink refill.
1
Makeup cap
Over cap
Makeup
cartridge bottle
●
Do not grip the over cap and lift the cartridge bottle.
The cartridge bottle could be dropped.
●
Since an IC chip is built into the cartridge bottle, avoid strong shock and
electromagnetic waves and liquid wetting.
CAUTION
[NOTE] If the color of icon is "Green", the makeup cartridge bottle can't be replaced.
●
Please set an unopened makeup cartridge bottle or an opened makeup cartridge bottle still has more than
half of its content. Before makeup cartridge bottle with reduced content is set in the printer, place the
cartridge bottle horizontally and confirm its level is more than half of its content.
Full
Empty
<Remaining Makeup Icon>
Replaceable Makeup level
Liquid level
●
If the makeup cartridge bottle with reduced content is set in the printer, the level of the Remaining Makeup
Icon displayed on the screen may suddenly drop to the Replaceable Makeup level. However, this is not a
failure and the printer operation can be continued.
(2) Operation
Liquid level
