●
Set the print specifications 4-90
Adjust print parameters
2015.07.07 12:45
Com=0
[Stop
]
Character height
（
0
〜
99
）
Character width
（
0
〜
3999
）
Print start delay
（
0
〜
9999
）
SC
Pulse rate div. Factor
Message name [
]
−
＋
Change unit
Save
Back
−
＋
８５
−
＋
０００２
−
＋
００００
−
＋
００１
(1/1
〜
1/999 Enter
denominator.)
HOME
Startup
Manual
Makeup
Ink
4.14.4 Fine adjust the print specifications (Adjust print parameters)
(1) Function
●
Starts from the Print description screen.
●
Current message print specifications “character height”, “character width”, “print start delay” and “Pulse rate
div. Factor” settings are easily set.
●
Since changes to the set value are immediately reflected in the printing, the changes be easily confirmed while
printing.
●
After setting in character units or mm units, fine adjust in scan units.
●
When you want to input in mm units, input “Line speed” in the print specifications screen.
(a) Previous HMI
“Adjust print parameters” screen
Reverse scan printing (UX-D,E only)
●
Selects whether or not reverse scan control which deflects the particles in the reverse order of the
conventional order is to be used.
●
The printing tilt when the print target is transported at high speed becomes smaller than the
conventional control system.
Refer to "9. Appendix" of the technician's manual for more information.
6
