4-85
●
Set the print specifications
Com=0
Edit
message
4th screen
2nd screen
3rd screen
First row width
Secind row width
( 0〜32)
( 0〜32)
02
01
Back
1st screen
Avoid shrink of leading character
Leading character with control
Print specifications
[Stop
]
Message name[
]
2015.07.07 12:45
format
Enable
Disable
HOME
Startup
Manual
Makeup
Ink
Leading character width control (UX-D,E only)
●
Set to prevent shrinking of the leading print character width at high speed line printing.
●
Can be set when product speed matching is "None" "Enhance".
●
As a means of preventing shrinking of the leading character width, unprinted particles are inserted at
the "First line width" and "Second line width" of the leading print character.
●
The number of unprinted characters that can be inserted is 0 to 32.
Necessary conditions for leading character width control
No.
Item
Conditions
1
Product speed matching
Set to None or Enhance.
2
The number of lines
[Print format: Individual setup, Overall setup]
Set the number of rows to 1 row or 2 rows.
[Print format: Free layout]
Not special setting.
3
Ink drop use
[Product speed matching: None]
Set Ink drop use to 1/1 or 1/2.
[Product speed matching: Enhance]
Set Ink drop use to 1/1.
4
Character size
[Ink drop use: 1/1]
All character sizes can be used.
[Ink drop use: 1/2]
Set the character size 4
×
5, 5
×
5, 5
×
8(5
×
7), 9
×
8(9
×
7),
7
×
10, 5
×
3 (chimney), 5
×
5(chimney), or 7
×
5(chimney).
17
Page 4 of "Print specifications" screen
●
When all the necessary conditions of 1 to 4 below are satisfied, leading character print control is enabled.