![Hitachi HTDK150EBS Instruction Manual Download Page 24](http://html.mh-extra.com/html/hitachi/htdk150ebs/htdk150ebs_instruction-manual_142020024.webp)
24
S p e a k e r s S e t u p
Note
•
Do not place the center and rear speakers far away from the
listening position than the front speakers.
•
Avoid positioning the speakers in corners, as this will boost
the bass tones too much.
•
Placing the speaker behind curtains, furniture etc. will re-
duce the treble response, thus reducing the stereo effect
considerably. The listener should still be able to see the
speaker.
•
Each room has different acoustic characteristics and posi-
tioning possibilities are often limited. You can find the best
position for your speakers by experimenting. In general, the
speakers should be arranged as symmetrically as pos-
sible.
Height
•
The best height for front and center speaker is at the height
of your ears (while seated)
•
The height of the rear speakers is not less than the height of
your ears (while seated).
See the following diagram. It s advisable to place the rear
speakers in the
D
area. However you can place them in
the
C
area, too.
Size
When you do not connect center, rear speakers or subwoofer,
set the parameters for them in the SETUP MENU. Since the
front speakers setting are fixed, you cannot change them.
The default settings are underlined.
•
ON: Normally select this.
•
OFF: If you will not connect the relevant speaker(s), select
this.
Note
•
When BASS MODE in the SETUP MENU is set to CONF 1,
see page 40, you cannot set the SUBWOOFER.
1
Press
SETUP
button to enter SETUP MENU. Use / to
select SPEAKER SETUP, and then press
ENTER
button.
30
o
60
o
C
D
C
D
2
Highlight CENTER using / , then press button to go to
the right option list. Select ON or OFF using / , then
press
ENTER
to confirm your selection.
3
Highlight REAR using
/ , then press
button to go to
the right option list. Select ON or OFF using / , then
press
ENTER
to confirm your selection.
4
Highlight SUBWOOFER using
/ , then press
button
to go to the right option list. Select ON or OFF using / ,
then press
ENTER
to confirm your selection.
5
Press
SETUP
again to exit menu.
ON
OFF
ON
OFF
ON
OFF
’