Intended audience
This book is intended for system administrators, Hitachi Vantara
representatives, and authorized service personnel who are responsible for
the on-site setup and recovery of an HCP Anywhere edge appliance. Readers
of this book should have experience with computer networking and
installing computer hardware and a basic understanding of HCP Anywhere
systems.
Release notes
Read the release notes before installing and using this product. They may
contain requirements or restrictions that are not fully described in this
document or updates or corrections to this document. Release notes are
available on Hitachi Vantara Support Connect:
https://knowledge.hitachivantara.com/Documents
Related documents
The following documents contain additional information about HCP
Anywhere:
•
HCP Anywhere Administrator Help
(MK-HCPAW000) — This help
contains the instructions you need to use the HCP Anywhere
Management Console. This console allows you to configure HCP
Anywhere for your users, enable and disable system features, and
monitor the system and its nodes.
•
Deploying an HCP Anywhere VM System
(MK-HCPAW011) — This
book provides the information you need to install HCP Anywhere in one
or multiple virtual machines.
Accessing product documentation
Product documentation is available on Hitachi Vantara Support Connect:
https://knowledge.hitachivantara.com/Documents
. Check this site for
the most current documentation, including important updates that may
have been made after the release of the product.
6
Preface
HCP Anywhere Edge Appliance On-Site Setup and Recovery
Intended audience
