To set the time and date:
1.
In the
Start
menu, click
Control Panel
.
2.
In the
Control Panel
window under
Clock, Language, and Region
, click
Set
the time and date
.
3.
In the
Date and Time
window, click
Change date and time...
.
4.
In the
Date and Time Settings window
, select the date on the calendar
and then click
OK
.
5.
In the
Date and Time
window, click
Change time zone...
.
6.
In the
Time Zone Settings
window, select the UTC time zone from the
dropdown and then click
OK
.
Step 5: Configure the network settings
Configure the network settings for your environment using the
Control
Panel
.
Step 6: Register the edge device
After you change the built-in administrator password, you can register the
edge device with HCP Anywhere. Once an edge device is registered, it
appears in the HCP Anywhere Management Console on the
Device
Management
page.
Important:
Make sure that you have network access to the HCP Anywhere
server before registering the edge device.
Note:
To register an edge device:
•
You need to authenticate with an AD user. HCP Anywhere does not
support registering an edge device with a SAML user.
•
In your HCP Anywhere profile, you need to have the edge device type
enabled. For information on enabling the edge device type in a profile,
see the
HCP Anywhere Administrator Help
.
28
Chapter 3: Configuring the HCP Anywhere edge appliance
HCP Anywhere Edge Appliance On-Site Setup and Recovery
Step 5: Configure the network settings
