Filtering/QoS Information
GR2K-GA-0014
1-45
Ver. 07-02
<Interface Name>
Description:
The subject interface name set in the IP information or the
IP-address information is designated. (The IP information or
IP-address information should have been set before inputting
this command.) The RM Ethernet is not supported. For details,
refer to Table 1-5.
Default:
No default is possible.
{in | out }
Description:
Inbound/Outbound is designated. Either one or both of the
Inbound/Outbound can be set simultaneously.
in :Inbound (designation on the frame input side)
out:Outbound (designation on the frame output side)
Default:
No default is possible.
[-disable]
Description:
The flow control is nullified by each input/output interface.
Default:
No default is possible.
list <List No.>
Description:
The list numbers are designated.
Default:
Default is possible only for the case of indication. All the lists
are indicated at default.
Range of value:
IPv6 filter list: 40001 to 60000 (decimal)
[list <List No.>-list <list No.>]
Description:
Specifies the range of a list number. This parameter can be
specified only when a blank list number is displayed.
Default:
The range of the list number to be displayed corresponds to all
list numbers.
Range of value:
IPv4 filter list: 1 to 20000 (decimal)
IPv6 filter list: 40001 to 60000 (decimal)
free
Description:
Displays the blank list number.
Default:
Cannot be omitted when the blank list number is displayed.
min_no
Description:
Displays the top blank list number in the specified range.
Default:
Cannot be omitted when the top list number of a blank list
number is displayed.
Flow detecting condition parameter
{ip |<protocolNo.>| tcp|udp|icmp6}
Description:
The high-order protocol numbers or protocol names are
designated. If all protocols are taken as the object, IP is
designated.