Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
1-174
GR2K-GA-0014
Ver. 07-02
-pair_synchronized
Checks the source and the destination IP addresses, and
upper-level source and destination protocol port numbers by
simultaneously switching the values (synchronized check). To
run the synchronized source and destination IP address
check, specify:
-ip_pair_off
. For the synchronized port
number check, specify:
-port_pair_ off
(see note 1).
Default:
-
pair_synchronized_off
-icmp_type <No.>
Description:
This parameter specifies the ICMP type.
Default:
None (ICMP type is not a flow detection condition).
Range of value:
0-255
-icmp_code <No.>
Description:
This parameter specifies the ICMP code.
Default:
None (ICMP code is not a flow detection condition).
Range of value:
0-255
-igmp_type <No.>
Description:
This parameter specifies the IGMP type.
Default:
None (IGMP type is not a flow detection condition).
Range of value:
0-255
-branch_index <No.>
Description:
This parameter specifies a connection branch Index number
(DLCI group information or Index specified using VC-Group
information). This parameter selects and sends the specified
DLCI/VC information in a group when it relays a packet that
coincides with QoS IP frame conditions. For the QoS IP frame
conditions under which the connection branch Index number
is set, specify parameter -out (Outbound) and set it as QoS IP
frame conditions on the output side when setting IP QoS
information. See 1.2.8 in this guide.
Default:
None
Range of value:
0-7
Table 1-85 List of IGMP Type Number
IGMP Type No. (HEX)
Input Value (Decimal)
Name
0x11
17
Membership Query
0x12
18
Version 1 Membership Report
0x13
19
DVMRP protocol
0x16
22
Version 2 Membership Report
0x17
23
Version 2 Leave Group
0x22
34
Version 3 Membership Report
