manualshive.com logo in svg

Hitachi GR2000 Series, Configuration Commands

The Hitachi GR2000 Series, a top-notch appliance, comes with a comprehensive Installation Manual to guide users through setup effortlessly. Download the user-friendly manual for free from our website manualshive.com, ensuring a seamless installation experience for your new Hitachi GR2000 product.

Share
Download
background image

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

5-88

GR2K-GA-0014

Ver. 07-02

5.11

IPX Information

Table 5-11 IPX Information Error Messages

Message

Contents

Can not delete IPX with IPX filtering
configuration.

Attempt made to delete a IPX where IPX filtering is set. After IPX
filtering is deleted, delete IPX configuration.

Can not delete IPX with IPX interface
configuration.

Attempt made to delete a IPX where IPX interface is set. After IPX
interface is deleted, delete IPX configuration.

Can not delete IPX with IPX rip filtering
configuration.

Attempt made to delete a IPX where rip filtering is set. After rip
filtering is deleted, delete IPX configuration.

Can not delete IPX with IPX sap filtering
configuration.

Attempt made to delete a IPX where sap filtering is set. After sap
filtering is deleted, delete IPX configuration.

Can not delete IPX with IPX static route
configuration.

Attempt made to delete a IPX where static route is set. After static
route is deleted, delete IPX configuration.

Can not delete IPX with IPX static sap
configuration.

Attempt made to delete a IPX where static sap is set. After static sap
is deleted, delete IPX configuration.

Can not delete IPX with ipx-arp configuration.

Attempt made to delete a IPX where IPX ARP is set. After IPX ARP
is deleted, delete IPX configuration.

Can not set ethernet-2.network address.

Ethernet-2.network address cannot be set. Ethernet-2.network
address cannot be set on interface other than ethernet.

Can not set ethernet802.3 network address.

Ethernet802.3 network address cannot be set. Ethernet802.3
network address cannot be set on interface other than ethernet.

Can not set llc network address.

Network address cannot be set. Network address cannot be set on
interface other than ether.

Can not set network address.

Llc network address cannot be set. Llc network address cannot be
set on interface other than ether.

Can not set node address.

Node address cannot be set. Node address cannot be set on
Ethernet interface.

Can not set snap network address.

Snap network address cannot be set. Snap network address cannot
be set on interface other than ether.

Destination network not specified.

There is no setting of destination network number. Specify
destination network number.

Destination Socket not specified.

There is no setting of destination socket address. Specify destination
socket address.

Duplicate ethernet-2 network address,
ethernet-2 network address.

Ethernet-2 network address and ethernet-2 network address are
identical. Specify each ethernet-2 network address and ethernet-2
network address unique.

Duplicate ethernet-2 network address,
ethernet802.3 network address.

Ethernet-2 network address and etherNet802.3 address are
identical. Specify each ethernet-2 network address and
etherNet802.3 address unique.

Duplicate ethernet-2 network address, llc
network address.

Ethernet-2 network address and llc network address are identical.
Specify each ethernet-2 network address and llc network address
unique.

Duplicate ethernet-2 network address,
network address.

Ethernet-2 network address and network address are identical.
Specify each ethernet-2 network address and network address
unique.

Duplicate ethernet-2 network address, snap
network address.

Ethernet-2 network address and snap network address are identical.
Specify each ethernet-2 network address and snap network address
unique.

Duplicate ethernet802.3 network address,
ethernet-2 network address.

Ethernet 802.3 network address and ethernet-2 network address are
identical. Specify each ethernet 802.3 network address and
ethernet-2 network address unique.

Duplicate ethernet802.3 network address,
ethernet802.3 network address.

Ethernet 802.3 network address and ethernet 802.3network address
are identical. Specify both of ethernet 802.3 network address unique.

Summary of Contents for GR2000 Series





















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for GR2000 Series

D-Link DIR-862L Manual preview
DIR-862L
Brand: D-Link Pages: 4
D-Link DIR-860L Quick Install Manual preview
DIR-860L
Brand: D-Link Pages: 2
D-Link DIR-850L Resetting Manual preview
DIR-850L
Brand: D-Link Pages: 9
D-Link DIR-850L Setup And Installation Manual preview
DIR-850L
Brand: D-Link Pages: 8
D-Link DIR-865L Specifications preview
DIR-865L
Brand: D-Link Pages: 3
D-Link DIR-867 Quick Install Manual preview
DIR-867
Brand: D-Link Pages: 28
D-Link DIR-X1530 Quick Start Manual preview
DIR-X1530
Brand: D-Link Pages: 2
D-Link DSL-2540B - ADSL2/2+ Modem With EN Router Quick Install Manual preview
DSL-2540B - ADSL2/2+ Modem With EN Router
Brand: D-Link Pages: 12
D-Link DIR-882 Quick Installation Manual preview
DIR-882
Brand: D-Link Pages: 62
QNAP QMiroPlus-201W Quick Installation Manual preview
QMiroPlus-201W
Brand: QNAP Pages: 20
Enginko MCF-LW06424 Operating Manual preview
MCF-LW06424
Brand: Enginko Pages: 19
APARIAN DH485 Quick Start Manuals preview
DH485
Brand: APARIAN Pages: 2
XMOS XC-2 Quick Start Manual preview
XC-2
Brand: XMOS Pages: 6
Kanguru Data Bank User Manual preview
Data Bank
Brand: Kanguru Pages: 13
WAGO 750-459 Manual preview
750-459
Brand: WAGO Pages: 48
NKE BOX Wi-Fi User Manual And Installation Manual preview
BOX Wi-Fi
Brand: NKE Pages: 15
YATO YT-82380 Original Instructions Manual preview
YT-82380
Brand: YATO Pages: 96
ActionTec GT704WR User Manual preview
GT704WR
Brand: ActionTec Pages: 115

Brands by name

Popular brands

Load more brands