- 16 -
Rules for creating a new PSK or a new WEP key:
Case No. Encryption Method
Allowable Characters for Encryption Key
1 (default
for SSID-1)
WPA-PSK, WPA2-PSK, or
WPA-PSK/WPA2-PSK
with key length of 8 to 63
characters
8 to 63 characters in any combination of alphanumerics
(0 to 9, a to z, and A to Z; case sensitive) and specific
symbols (other than space, apostrophe, single quote,
double quote, comma, and backslash). Entry of all
asterisks is not acceptable.
2
WPA-PSK, WPA2-PSK, or
WPA-PSK/WPA2-PSK
with key length of 64
characters
64 characters in any combination of hexadecimal letters
(0 to 9, a to f, and A to F; case sensitive).
3
64-bit WEP key with
5-digit alphanumeric
Configuration Type
5 characters in any combination of alphanumerics (0 to
9, a to z, and A to Z; case sensitive) and specific symbols
(other than space, apostrophe, single quote, double
quote, comma, and backslash). Entry of all asterisks is
not acceptable.
4
64-bit WEP key with
10-digit hexadecimal
Configuration Type
10 characters in any combination of hexadecimal letters
(0 to 9, a to f, and A to F; case sensitive).
5 (default
for SSID-2)
128-bit WEP key with
13-digit alphanumeric
Configuration Type
13 characters in any combination of alphanumerics (0 to
9, a to z, and A to Z; case sensitive) and specific symbols
(other than space, apostrophe, single quote, double
quote, comma, and backslash). Entry of all asterisks is
not acceptable.
6
128-bit WEP key with
26-digit hexadecimal
Configuration Type
26 characters in any combination of hexadecimal letters
(0 to 9, a to f, and A to F; case sensitive).
If you wish to confirm the current encryption method and, on an as necessary basis,
create a new PSK or a new WEP key, follow the procedure below.
1. Referring to Section 4.2, connect the user PC to the Gateway by means of wired
LAN (LAN cable).
2. Temporarily terminate firewall and/or antivirus software if running on the user PC.
3. Type the URL of the “EMS Gateway” setup page (“https://192.168.24.1/” by default)
in the address bar of your browser and hit the Enter key. A log-in dialog opens.
4. Type your user ID (“user” by default) and password (“user” by default) in applicable
fields, and click
OK
button.
