Hitachi ED-X8255 User Manual Download

Page: 72 / 108

Settings

Schedule Settings

Displays and conﬁgures schedule settings.

Item

Description

Daily

Conﬁgures the daily schedule.

Schedule

Click the

[Enable]

check box to enable daily scheduling.

Schedule List

Displays the current daily schedule.

Sunday

Conﬁgures the Sunday schedule.

Schedule

Click the

[Enable]

check box to enable Sunday scheduling.

Schedule List

Displays the current Sunday schedule.

Monday

Conﬁgures the Monday schedule.

Schedule

Click the

[Enable]

check box to enable Monday scheduling.

Schedule List

Displays the current Monday schedule.

Tuesday

Conﬁgures the Tuesday schedule.

Schedule

Click the

[Enable]

check box to enable Tuesday scheduling.

Schedule List

Displays the current Tuesday schedule.

Wednesday

Conﬁgures the Wednesday schedule.

Schedule

Click the

[Enable]

check box to enable Wednesday scheduling.

Schedule List

Displays the current Wednesday schedule.

Thursday

Conﬁgures the Thursday schedule.

Schedule

Click the

[Enable]

check box to enable Thursday scheduling.

Schedule List

Displays the current Thursday schedule.

Friday

Conﬁgures the Friday schedule.

Schedule

Click the

[Enable]

check box to enable Friday scheduling.

Schedule List

Displays the current Friday schedule.

Saturday

Conﬁgures the Saturday schedule.

Schedule

Click the

[Enable]

check box to enable Saturday scheduling.

Schedule List

Displays the current Saturday schedule.

Summary of Contents for ED-X8255













































































































Search results

Summary of Contents for ED-X8255

Reviews:

Related manuals for ED-X8255

Brands by name

Popular brands

Hitachi ED-X8255, User Manual

Search results

Summary of Contents for ED-X8255

Reviews:

Related manuals for ED-X8255

Brands by name

Popular brands