5-19
Section 5 - System Operation Manual
(E-Compact ATSC Transmitters - EC701HP thru EC708HP)
ATTENTION
When accessing this screen, by selecting option “YES”, the operator will be responsible
for the changes done on this parameter, as well as the effects that these changes may
cause in the equipment if not using the appropriate instruments and test point.
To access the
Pre-Correction
screen, select “Yes” by using the keys
or
. Selecting
NO, the software goes to the previous screen.
Select
Non-Linear
and press ENTER.
Use the keys
or
to enable or disable the pre-correction.
Press key ESC to return to Pre-Correction Setup.
Select
Linear
and press ENTER.
>
>
>
>
>
>
Use the keys
or
to enable or disable the pre-correction.
Press key ESC to return to
Setup Menu
.
>
>
Manual Rev. 0.1 - February 2018
