Hitachi E990 Technical Reference Download Page 31

Page: 31 / 32

Field

Description

2. To register multiple storage systems, best practice is to check this check box for

the settings so that they do not start services while they are added.

8. Wait 10 to 15 minutes for all the services to start. The storage system status will

show up as Processing while the services are starting up and Ready when the storage

system is available.

Next steps

Before users can log in to and start using the storage system, the system administrator

must complete the following setup and configuration tasks:

■

Configure the management client.

■

Configure the management software.

■

Configure the storage system.

■

(Optional) Set up SSL communications.

■

Set up the user accounts.

For details about these tasks and instructions for performing them, see the System

Administrator Guide for your storage system.

Adding the storage system to the Storage Device List

Chapter 5: Registering the storage system on the Storage Device List

Service Processor 3 (SVP3) Technical Reference

Summary of Contents for E990

































Search results

Summary of Contents for E990

Reviews:

Related manuals for E990

Brands by name

Popular brands

Hitachi E990, Technical Reference

Search results

Summary of Contents for E990

Reviews:

Related manuals for E990

Brands by name

Popular brands