Field
Description
System Selection
1
Select one of the following methods to
discover the storage system.
■
Auto Discovery: Acquire the storage
system information automatically.
(default)
■
Manual: Specify the storage system
manually.
CTL 1
Enter the IP address for controller 1.
Accept the default IPv4 setting or click
IPv6, and then enter the IP address in
the appropriate format for the
addressing method selected.
CTL 2
Enter the IP address for controller 2.
Accept the default IPv4 setting or select
IPv6, and then click the IP address in
the appropriate format for the
addressing method selected.
System Name
Enter the display name of the storage
system, up to 180 characters. Permitted
characters are one-byte alphanumeric
characters and symbols (# $ % & ' * +
- . / = ? @ ^ _ ` { | } ~). You cannot use
one-byte spaces.
Description
Enter the description of the storage
system, up to 180 characters.
User Name
Enter a user name. Permitted
characters are one-byte alphanumeric
characters and symbols (# $ % & ' * +
- . / = ? @ ^ _ ` { | } ~). The GUI includes
a 256-character limit.
Password
Enter a password. The GUI includes a
256-character limit.
Do not start service after addition
immediately
2
Select if you do not want to start service
after adding the storage system.
(Default is unchecked.)
Notes:
1. Service personnel set the storage system information manually. User should
not select Manual to set it.
Adding the storage system to the Storage Device List
Chapter 5: Registering the storage system on the Storage Device List
Service Processor 3 (SVP3) Technical Reference
30
