3 - 3
2
Deleting Files on DVD-RAM Disc
2.1
Deleting disc control data (RX) file
Caution:
Executing this operation will delete all the following data on disc.
Take note of the details of setting if they will need resetting after
deletion:
Skip data
Fade data
Record mode setting (FINE, STD, frame , etc.)
Purpose:
To erase the RX file which contains the disc control data on playback skip
setting, playback fade setting, thumbnails, etc.
Delete the RX file when:
Thumbnails cannot normally be displayed using Disc Navigation, or
message "Disc full. Cannot execute." appears on LCD screen even though
the disc has sufficient free space.
(These phenomena may occur if the DVD video camera/recorder is turned
off while the RX file is being written to disc.)
Before starting:
Use the joystick to move the cursor, select a menu item, and designate it
while the debug menu is being activated. (Tilt up, down, to left or right to
select an item, and press the center of joystick to designate the item.)
Operational procedure:
1) Insert the DVD-RAM disc whose RX file is to be deleted.
2) Turn the DVD video camera/recorder on, and then press the DISC
NAVIGATION button.
3) While the Disc Navigation menu screen is displayed, tilt the joystick to
right and hold it, and then press the following 2 buttons simultaneously,
to display the debug menu:
SELECT
REC
4) With the debug menu screen (Fig. 2-1) displayed, choose "Delete RX
file" and designate it.
To restore normal status, press the stop/cancel button.
Note: The following shows the functions when menu items other than "Delete
RX file" are chosen on the debug menu screen:
Version:
To display firmware versions (same function
as "1.1 Checking firmware versions")
Error Code:
Invalid
Drive Status:
Invalid
Format Disc Lv1: Do not use (*1)
(*1)
(*1)
Staff:
Invalid
*1
*1
*1
*1
*1: Do not use this function. This initialization is more precise than in
"Initialization of DVD-RAM disc" on Disc Navigation and "Forced disc
formatting" in the following section. However, it takes considerable time
to complete, and then a disc with which initialization has failed cannot
then be initialized on this video camera/recorder anymore (initialization
on PC will be necessary).
Example of debug menu screen
Fig. 2-1
Debug Menu
ENTER
RETURN
RAM
Version
Error Cord
Drive Status
Delete RX file
Format Disc Lv1
Staff
