6 - 7
4) Check the communication port to which the RS-232C
cable is connected, and then choose the radio button of
corresponding port on COMMUNICATION PORT
SETTING screen.
5) Click the OK button on the COMMUNICATION PORT
SETTING screen, and then proceed with the MODEL
SELECT screen.
Note:
If the POWER OR CONNECTION ERROR dialog
appears , perform the following procedure:
1) Make sure that the connections for adjustment are
correct, and that the DVD video camera/recorder or
DSP-R jig is powered.
2) If there is a problem in connections or power supply,
take care of the problem, and then click the YES
button to proceed with the MODEL SELECT screen.
If there is no problem in connections or power
supply, the indication will be that the incorrect
communication port has been chosen. Click the NO
button in POWER OR CONNECTION ERROR dialog
to proceed with the COM PORT ERROR dialog:
Click the OK button, and then choose the correct
communication port.
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
MANUAL ADJUSTMENT PROGRAM
for SERVICE STATION
COM PORT SETTING
PORT 1
PORT
PORT 6
PORT 5
PORT 4
PORT 3
PORT 2
OK
EXIT
Copyright (C) HITACHI, Ltd 2003
4
5
COMMUNICATION PORT SETTING
screen
POWER OR CONNECTION ERROR dialog
OK
COM PORT ERROR
ERROR
!
COM PORT ERROR dialog
YES
NO
MAY OCCURE ON CABLE OR JIG OR CAMCORDER.
POWER FAILURE OR CONNECTION ERROR!
ERROR
Adjustment > Creating Reference Data
