6 - 31
Adjustment > Adjustment Procedure
6-4-10 Spot Noise
Information:
1) The SPOT NOISE adjustment compensates for bright points that appear on the screen, and
these are caused by a defect in pixel of CCD (image sensor) that may occur when DVD video
camera/recorder is used under particular conditions or for a long time. Therefore, execute SPOT
NOISE only in the following cases:
a) Pixel defect occurs in CCD and a bright point appears on screen,
b) Lens unit (CCD) is replaced
c) “Data Initialize” is executed
2) The presence or absence of a bright point that appears on screen due to pixel defect on CCD can
easily be judged by capping the lens. Use a CRT color monitor for this check.
Procedure:
1) Check SPOT NOISE on the ADJUST MENU screen.
2) Click the EXECUTE button on ADJUST MENU screen
to start adjustment.
When SPOT NOISE starts, the DVD video camera/
recorder will automatically turn on again.
3) When adjustment is complete, the ADJUSTMENT
FINISHED dialog will appear: Click the OK button in
dialog to restore the ADJUST MENU screen.
If bright point still appears after adjustment is finished,
the lens unit (CCD) may be faulty.
ADJUST MENU screen
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
MODEL NAME:
××××
DATA INITIALIZE
EXECUTE
RETURN
PLEASE SELECT ADJUST
ADJUST MENU
SAMPLING PULSE
AUTO IRIS CONTROL
MATRIX
CHROMA GAIN
AUTO FUCUS
STABILIZER
SPOT NOISE
LCD
EVF
VIDEO LEVEL
BURST LEVEL
2
1
ADJUSTMENT FINISHED dialog
FINISHED
ADJUSTMENT FINISHED.
OK
3
