English
158
*1
•
This message may also appear when dirt adheres to disc. If this message appears when a recorded disc
is recognised immediately after it is inserted, do not repair the disc; remove it and then use a soft, dry
cloth to clean off the dirt before using it.
•
This message may also appear when condensation occurs. In this case, do not repair the disc; turn the
DVD video camera/recorder off, wait until it dries out, and then turn it on again.
•
If the repair message appears when you turn the DVD video camera/recorder on from off with a disc
loaded after recording on it, choose repair.
•
If the repair message appears when recording and playback are normally possible with another disc -
and no condensation occurs and the disc is not dirty - choose repair.
*2
•
This message may also appear when dirt adheres to disc. In this case, do not initialise the disc; remove
it and then use a soft, dry cloth to clean the dirt before using it.
•
This message may also appear when condensation occurs. In this case, do not initialise the disc; turn
the DVD video camera/recorder off, wait until it dries out, and then turn it on again.
•
Initialisation will delete all data on disc.
*3
•
This message may also appear when dirt adheres to disc. Remove the disc and then use a soft, dry cloth
to clean the dirt before using it.
•
This message may also appear when condensation occurs. Wait until the DVD video camera/recorder
dries out, and then turn it on again.
•
This message will appear when a single-sided disc is inserted in reverse. Reinsert the disc correctly.
(Insert the disc with the label printed surface facing the outside.)
